AutomatePro by Lemvos Robotics is an all-in-one rugged ROS 2 controller for outdoor and marine robotics. It combines NVIDIA Jetson Orin series computing with integrated I/O, RTK GNSS, IMU, connectivity, and vendor-supported ROS 2 drivers in an IP67 enclosure.

The industrial control system uses modern 64-bit architecture with fast 4-core CPUs that can be flexibly assigned to control tasks for optimum efficiency. ctrlX CORE has a wide range of interfaces such as 1Gbit Ethernet, USB and a µSD card slot as well as remanent memory for secure data storage as standard. The Edge Controller's field communication is handled via EtherCAT as an automation bus and thus enables easy integration of EtherCAT peripherals. If servicing is required, quick and PC-free hardware replacement can be carried out with the help of a license dongle.

Tinymovr is an affordable servo motor controller with an embedded angle sensor. It enables trajectory, position, velocity and torque control using Field Oriented Control (FOC), and operation through CAN bus.

MD80 is an integrated brushless motor controller designed by MAB robotics for transforming regular brushless motors into advanced actuators.

roshand gen2 is a low-cost and highly adaptive robotic hand, every fingertips have 14 tactile sensors, 28 tactile sensors in total.

OpenCR means Open-source Control Module for ROS. OpenCR is developed for ROS embedded systems to provide completely open-source hardware and software.

Dynamixel (Dynamic + Cell) is a high-performance, all-in-one actuator designed for multi-jointed robot configurations.

The RH-P12-RN is 1-DOF two-finger hand. It supports DYNAMIXEL 2.0 protocol via DYNAMIXEL BUS. This hand designed for adaptive gripping, so you can use it for adaptive gripping for various shapes of objects. Also, it supports torque control and current-based position control make it possible to pick up objects of various materials.

The anthropomorphic SCHUNK 5-finger hand grips nearly as perfectly as the human hand. Due to the moving parts with a total of nine drives, various gripping operations can be executed with high sensitivity. Elastic gripping surfaces ensure a reliable grip on objects.

SensorHand Speed is a hand prosthetics product developed by Otto Bock.

NXT is a modular robotics kit manufactured by Lego.

The Intel® Edison is an ultra small computing platform that will allow you to jump into ROS with a stamp size computer.

The Shadow Dexterous Hand is a truly anthropomorphic approach to robot manipulation.

This is the AR10 robotic hand from Active8 Robots. It is actuated using 10 prismatic servos which can be used to achieve a wide variety of poses.

Navio2 Autopliot Shield for Raspberry Pi board

The Intel® Euclid™ Development Kit features the integration of Intel® RealSense™ depth camera technology, a motion camera, and an Intel® Atom™ x7-Z8700 Quad core CPU to produce a compact and sleek all-in-one computer and depth camera. The Intel® Euclid™ Development Kit is designed to be operable out of the box with pre-installed software including an Ubuntu® operating system.

Erle-brain is a Linux-based autopilot for making drones. It consists of a BeagleBone Black and a PixHawk Fire cape that put together conform a 1GHz Cortex-A8 embedded computer that has 29 sensors and many interfacing possibilities.

The BH8-series BarrettHand™ is a multi-fingered programmable grasper with the dexterity to secure target objects of different sizes, shapes, and orientations.

Allegro Hand is a low-cost and highly adaptive robotic hand.